K&N Marine Flame Arrestors & Accessories Boat Applications

K&N Marine Flame Arrestor 59-1195

K&N Flame Arrestors for Boats

  • Marine approved per SAE J1928 standard
  • Designed to increase horsepower & torque
  • Washable and reusable air filter

Due to the differences in engine compartment designs, and accessories supplied by those manufactures, clearances may vary from boat to boat. The applications listed are to be used as a reference guide only. Make sure to double check all the measurements before ordering by using the checklist below. If you wish to increase or decrease the size of the filter, see Universal 3-Piece assemblies below. (K&N Marine Flame Arrestor 59-1195 shown in picture)


IMPORTANT: DID YOU CHECK THE FOLLOWING?

  1. Diameter clearance around the existing flame arrestor. Can the flame arrestor diameter be increased?
  2. Height restriction, due to hatch clearance or any other obstruction. Can the flame arrestor’s height be increased?
  3. Do any vent lines connected to existing flame arrestor. If there are vent lines attached, measure inside diameter of vent line and order appropriate vent hose kit below.
  4. For multiple carburetor application, check center to center measurements ensuring enough space for two flame arrestors.
  5. Check diameter of carburetor.

K&N Marine Flame Arrestors for Indmar Boats

Engine & Fuel System Engine Size Total Height Element Height K&N Flame Arrestor Footnotes
5.7L Malibu Vortec 4 bbl 5.7L V8 3.75" 2" 59-3264 1
5.7l Vortec Carb 4 bbl 5.7L V8 3.75" 2" 59-3264 1
5.7L Vortec TBI 5.7L V8 3.75" 2" 59-3264 1,3
7.4L 4 bbl 7.4L V8 3.75" 2" 59-3264 1
7.4L MPI 7.4L V8 N/A N/A 59-5020
8.1L 4 bbl 8.1L V8 4.50" 2.75" 59-3364 1,2
8.1L PFI 8.1L V8 N/A N/A 59-5020

K&N Marine Flame Arrestors for Mercury Boats

Engine & Fuel System Engine Size Total Height Element Height K&N Flame Arrestor Footnotes
3.0L 2 bbl (5.125" Flange) 3.0L L4 3.75" 2" 59-3264 1
3.0L 2 bbl (3.063" Flange) 3.0L L4 3.75" 2" 59-3262 1
3.0L 2 bbl (3.063" Flange) 3.0L L4 3.75" 2.875" 59-3362 1
4.3L 2 bbl (5.125" Flange) 4.3L V6 3.75" 2" 59-3264 1
4.3L 2 bbl (3.063" Flange) 4.3L V6 3.75" 2" 59-3262 1
4.3L 2 bbl (3.063" Flange) 4.3L V6 3.75" 2.875" 59-3362 1
4.3LH 4 bbl 4.3L V6 3.75" 2" 59-3264 1
4.3L EFI TBI 4.3L V6 3.75" 2" 59-3264 1,3
5.0L 2 bbl (5.125" Flange) 5.0L V8 4.50" 2.75" 59-3364 1,2
5.0L 2 bbl (3.063" Flange) 5.0L V8 4.50" 2" 59-3262 1,2
5.0L 2 bbl (3.063" Flange) 5.0L V8 4.50" 2.875" 59-3362 1,2
5.0L EFI TBI 5.0L V8 4.50" 2.75" 59-3364 1,2,4
5.7L 2 bbl (5.125" Flange) 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7L 2 bbl (3.063" Flange) 5.7L V8 3.75" 2" 59-3262 1,2
5.7L 2 bbl (3.063" Flange) 5.7L V8 4.50" 2.875" 59-3362 1,2
5.7L SKI 2 bbl (5.125" Flange) 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7L SKI 2 bbl (3.063" Flange) 5.7L V8 3.75" 2" 59-3262 1,2
5.7L SKI 2 bbl (3.063" Flange) 5.7L V8 4.50" 2.875" 59-3362 1,2
5.7L EFI TBI 5.7L V8 4.50" 2.75" 59-3364 1,2,4
98-00 Mercruiser 7.4L V8 6.625" 6" 59-5004
Early Mercruiser MPI 3V Pulley 454 MAG 4.375" 4" 59-4541 5
Early Mercruiser MPI 3V Pulley 502 MAG 4.375" 4" 59-4541 5
Late MPI Serpentine Belt 454 MAG 4.375" 4" 59-4542 6
Late MPI Serpentine Belt 502 MAG 4.375" 4" 59-4542 6
496 MPI 8.1L V8 4.375" 4" 59-5005
496 HO & Mag MPI 8.1L V8 4.375" 4" 59-5005
HP 500 4 bbl 8.2L V8 6.75" 5" 59-3370 1,2
HP 500 MPI 8.2L V8 4.375" 4" 59-5020

K&N Marine Flame Arrestors for Volvo Penta SX Series Boats

Engine & Fuel System Engine Size Total Height Element Height K&N Flame Arrestor Footnotes
3.0 GS 2 bbl (5.125" Flange) 3.0L L4 3.75" 2" 59-3264 1
3.0 GS 2 bbl (3.063" Flange) 3.0L L4 3.75" 2" 59-3262 1
3.0 GS 2 bbl (3.063" Flange) 3.0L L4 3.75" 2.875" 59-3362 1
4.3GL 2 bbl (5.125" Flange) 4.3L V6 3.75" 2" 59-3264 1
4.3GL 2 bbl (3.063" Flange) 4.3L V6 3.75" 2" 59-3262 1
4.3GL 2 bbl (3.063" Flange) 4.3L V6 3.75" 2.875" 59-3362 1
4.3L Gi EFI-TBI 4.3L V6 3.75" 2" 59-3264 1,3
5.0GL 2 bbl (5.125" Flange) 5.0L V8 4.50" 2.75" 59-3364 1,2
5.0GL 2 bbl (3.063" Flange) 5.0L V8 4.50" 2" 59-3262 1,2
5.0GL 2 bbl (3.063" Flange) 5.0L V8 4.50" 2.875" 59-3362 1,2
5.0L Gi EFI-TBI 5.0L V8 4.50" 2.75" 59-3364 1,2,4
5.7 GS 2 bbl (5.125" Flange) 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7 GS 2 bbl (3.063" Flange) 5.7L V8 4.50" 2" 59-3262 1,2
5.7 GS 2 bbl (3.063" Flange) 5.7L V8 4.50" 2.875" 59-3362 1,2
5.7L Gsi EFI-TBI 5.7L V8 4.50" 2.75" 59-3364 1,2,4
7.4 Gi MPI 7.4L V8 4.50" 2.75" 59-3364 1,2,4

K&N Marine Flame Arrestors for Volvo Penta Duoprop Series Boats

Engine & Fuel System Engine Size Total Height Element Height K&N Flame Arrestor Footnotes
4.3GL 2 bbl (5.125" Flange) 4.3L V6 3.75" 2" 59-3264 1
4.3GL 2 bbl (3.063" Flange) 4.3L V6 3.75" 2" 59-3262 1
4.3GL 2 bbl (3.063" Flange) 4.3L V6 3.75" 2.875" 59-3362 1
4.3L Gi EFI-TBI 4.3L V6 3.75" 2" 59-3264 1,4
5.0GL 2 bbl (5.125" Flange) 5.0L V8 4.50" 2.75" 59-3364 1,2
5.0GL 2 bbl (3.063" Flange) 5.0L V8 3.75" 2" 59-3262 1,2
5.0GL 2 bbl (3.063" Flange) 5.0L V8 4.50" 2.875" 59-3362 1,2
5.0L Gi EFI-TBI 5.0L V8 4.50" 2.75" 59-3364 1,2,4
5.7 GS 2 bbl 5.7L V8 4.50" 2.75" 59-3364 1,2
5.7L Gsi EFI-TBI 5.7L V8 4.50" 2.75" 59-3364 1,2,4
7.4 Gi EFI-MPI 7.4L V8 4.50" 2.75" 59-3364 1,2,4
7.4 Gsi EFI-MPI 7.4L V8 4.50" 2.75" 59-3364 1,2,4
8.1L MPI EFI-MPI 8.1L V8 4.50" 2.75" 59-3364 1,2,4

K&N Marine Flame Arrestors for Volvo Penta High-End Series Boats

Engine & Fuel System Engine Size Total Height Element Height K&N Flame Arrestor Footnotes
DPX 385 EFI-MPI 7.4L/454 4.50" 2.75" 59-3364 1,2,4
DPX 415 EFI-MPI 8.2L/502 4.50" 2.75" 59-3364 1,2,4
DPX 500 EFI-MPI 8.2L/502 4.50" 2.75" 59-3364 1,2,4
DPX 600 EFI-MPI 8.8L/540 4.50" 2.75" 59-3364 1,2,4

K&N Marine Flame Arrestor for Volvo Penta Inboard Series Boats

Engine & Fuel System Engine Size Total Height Element Height K&N Flame Arrestor Footnotes
7.4Gi EFI-MPI 7.4L/454 4.50" 2.75" 59-3364 1,2,4

K&N Marine Flame Arrestor for Volvo Penta Platinum Series Boats

Engine & Fuel System Engine Size Total Height Element Height K&N Flame Arrestor Footnotes
7.4Gi EFI-MPI 7.4L/454 4.50" 2.75" 59-3364 1,2,4

Footnotes for above applications: 1) May increase size as needed. 2) May decrease size as needed. 5) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5005. 6) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5006. 7) Single Stud, 3-7/8" throttle body 8) 3 Studs, 3-5/8" throttle body.


Oval Four Bolt Flame Arrestor Adapter for Mercruiser MPI

K&N Flame Arrestor Adapter 85-8837

This oval, four bolt flame arrestor adapter is used for early model Mercruiser MPI with a 3V Pulley and late model MPI with a serpentine belt.


Universal 3-Piece Air Filter Assembly

Outside Diameter Flange Diameter Element Height Total Height Velocity Stack K&N Flame Arrestor
14" 5-1/8" 2.25" 3.87" No 59-3214
14" 5-1/8" 3.0" 4.62" No 59-3314
14" 5-1/8" 4.0" 5.62" No 59-3414
9" 5-1/8" 2.75" 4.5" No 59-3364
9" 5-1/8” 2.0" 3.75" No 59-3264
9" 5-1/8" 5.0" 6.75" No 59-3370
9" 5-1/8" 2.75" 8.5" Yes 59-1195
9" 5-1/8" 5.0" 10.75" Yes 59-1196
9" 4-7/32" 2.75" 4.5" No 59-3368
9" 3-1/16" 2.0" 3.75" No 59-3262
9" 3-1/16" 2.75" 4.5" No 59-3362
9" 2-5/8" 2.75" 4.5" No 59-3360
9" 7-5/16” 5.0" 10.75" Yes 59-1198
9" 7-5/16" 2.75" 4.5" No 59-0284
9" 7-5/16" 2.75" 8.5" Yes 59-3366
9" 7-5/16” 5.0" 6.75" No 59-1197

 

K&N Flame Arrestor 59-5004 for 98-00 Mercruiser 7.4L
K&N Flame Arrestor 59-5004 for 98-00 Mercruiser 7.4L

K&N Flame Arrestor 59-3364 for Carb Applications
K&N Flame Arrestor 59-3364 for Carb Applications

K&N Flame Arrestor 59-5005 for Mercruiser 496 HO
K&N Flame Arrestor 59-5005 for Mercruiser 496 HO

K&N Flame Arrestor 59-5020 for Mercruiser HP 500
K&N Flame Arrestor 59-5020 for Mercruiser HP 500

K&N Flame Arrestor Vent Hose Adapter for 3 Piece Assembly
K&N Flame Arrestor Vent Hose Adapter for 3 Piece Assembly

K&N Flame Arrestor 59-4541 for Mercruiser 454/502 Magnum
K&N Flame Arrestor 59-4541 for Mercruiser 454/502 Magnum


Marine Vent Hose Adapters (Trimming for correct height may be required)

Vent Hose Size Air Filter Height Vent Adapter
1/4" 2.75" 85-1325
1/4" 4" 85-1425
1/4" 6" 85-1625
3/8" 2.75" 85-1337
3/8" 4" 85-1437
3/8" 6" 85-1637
1/2" 2.75" 85-1350
1/2" 4" 85-1450
1/2" 6" 85-1650
5/8" 2.75" 85-1362
5/8" 4" 85-1462
5/8" 6" 85-1662
3/4" 2.75" 85-1375
3/4" 4" 85-1475
3/4" 6" 85-1675

K&N Clamp-On Marine Flame Arrestors

K&N Clamp-On Marine Flame Arrestors

Type Flange Length Width Height Notes K&N Flame Arrestor
Oval 2.93"x4.75" 6.5" 4.75" 5.62" GM TPI 59-5000
Oval 2.93"x4.75" 8.62" 4.5" 3.18" GM LT-1 No Vent 59-5020
Oval 2.93"x4.75" 8.62" 4.5" 3.18" GM LT 5/8" Vents(2) 59-5021
Oval 2.93"x4.75" 8.62" 4.5" 3.18" GM LT-1 5/8" Vent 59-5019
Oval 2.93"x4.75" 8.62" 5.25" 5.5" GM 454 TPI 59-5050
Oval 3.44"x5.44" 8.5" 5.06" 5" 59-5007
Round 3.75" 9.5"x4.625"B 8.5"x3.75"T 4" 454/502 MAG 59-5005
Round 3.75" 9.5"x4.625"B 8.5"x3.75"T 4" 454/502 MAG 1/2" Vent 59-5006
Round 3.5" 5" 4.5"x3.25" 5" 59-5003
Round 3.625" 5.75" 3" 6" 59-5004
Round 3.625" 5.75" 3" 6" 96-97 GM 2) 3/4" Vents 59-5001
Round 3.75" 9.31" 4.5" 3" 96-97 GM (2) 5/8" Vents 59-5022
Round 3.75" 9.31" 4.5" 3" 96-97 GM (2) 3/4" Vents 59-5023
Round 3.75" 9.31" 4.5" 3" 96-97 GM 59-5030
Round 3.75" 9.31 4.5" 3" 96-97 GM 5/8" Vent 59-5010
Round 3.75" 5.25" 3" 6" 59-2030
Round 4" 5.38" 4.5x3.25" 5" 59-5002
Chat Now Chat Now