K&N Filter Care Service Kit For a Million Miles of K&N Performance
- 03.11.2003
RIVERSIDE, CA – K&N Engineering launched the performance-air filtration aftermarket in the 1960s. Since then, automotive-performance enthusiasts worldwide have made the K&N Filter their first upgrade on every vehicle and powersports machine they own. Not only does K&N's legendary FilterCharger® allow more air to enter the intake system and give measurable increases in horsepower, unlike disposable filters, K&N Filters provide outstanding filtration for the life of a vehicle (in most cases).
K&N FilterChargers® use a specially formulated oil to attract and suspend dirt to the cotton-gauze filtration surface. Over time, dirt accumulates on the filter and airflow can be reduced. This is where the K&N Recharger® Kit comes to the rescue. Included are a cleaning solution and dirt-attracting oil, both of which are formulated specifically for K&N's cotton-gauze filter media.
Using the K&N cleaning kit is surprisingly easy and involves just seven simple steps: 1) Pre-cleaning with a soft brush to dislodge loose dirt, 2) Spraying on the cleaning solution and allowing it to soak in for 10 minutes, 3) Rinsing with low-pressure water from the clean side to the dirty side, 4) Shaking out excess water and allowing the filter to dry naturally, 5) Lightly oiling each filter pleat and allowing the oil to impregnate the gauze, 6) Allow to set for 20 minutes, 7) Checking and re-oiling the light spots and finally reinstalling the filter. Typical filter-service interval is about 30,000 to 50,000 miles, depending on conditions (more often in dusty or off-road environments).
Two K&N Filter Care Service Kits are offered. Both include a 12-ounce bottle of Cleaning solution, but Oil packaging varies. Choose from the 8-ounce Squeeze Oil version (Part #99-5050) or 6.5-ounce aerosol Spray Oil (Part #99-5000).
For additional information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.
K&N FilterChargers® use a specially formulated oil to attract and suspend dirt to the cotton-gauze filtration surface. Over time, dirt accumulates on the filter and airflow can be reduced. This is where the K&N Recharger® Kit comes to the rescue. Included are a cleaning solution and dirt-attracting oil, both of which are formulated specifically for K&N's cotton-gauze filter media.
Using the K&N cleaning kit is surprisingly easy and involves just seven simple steps: 1) Pre-cleaning with a soft brush to dislodge loose dirt, 2) Spraying on the cleaning solution and allowing it to soak in for 10 minutes, 3) Rinsing with low-pressure water from the clean side to the dirty side, 4) Shaking out excess water and allowing the filter to dry naturally, 5) Lightly oiling each filter pleat and allowing the oil to impregnate the gauze, 6) Allow to set for 20 minutes, 7) Checking and re-oiling the light spots and finally reinstalling the filter. Typical filter-service interval is about 30,000 to 50,000 miles, depending on conditions (more often in dusty or off-road environments).
Two K&N Filter Care Service Kits are offered. Both include a 12-ounce bottle of Cleaning solution, but Oil packaging varies. Choose from the 8-ounce Squeeze Oil version (Part #99-5050) or 6.5-ounce aerosol Spray Oil (Part #99-5000).
For additional information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit www.knfilters.com.
